Page 13 - RDS JADI 1

Contactless Microphone Doppler Main Sensor - Contact Microphone for picking up and pre-amplifying acoustic vibrations. Contact Mi-
Microphone deployed. crophone weighs 595g and can be deployed free standing, in the Multi Position Stand or with one of the
following attachments:

Bronze G-Clamp for attachment to appropriate devices usually UXB tail fin.

Magnetic Clamp for attachment to ferrous surface usually on UXB or ferrous enclosure.

Suction Clamp can be used on a variety of surfaces including glass windows for monitoring sounds/
voices inside a room.

Probe enables the Contactless Microphone to be used as a hand search instrument for probing in soft
ground /sand including to pick up sounds from shallow underground tunnels.

Miniature Sensor which can be taped to various enclosures usually in a Counter IED role.

Bomb Probe Sensor for use with long bomb probe to monitor buried UXB (long probe is not part of the
DEPLOYMENT OF SENSORS equipment).

Microwave Doppler Contactless Microphone can be used as a hand held search instrument or can be de-
ployed in the Multi Position Stand. It enables the Bomb Technician to monitor movement in a wide range
of timing devices at a useful stand-off distance from the device being monitored. Usually deployed for
search and Counter IED applications. The Doppler Contactless Microphone weighs 600g.

Remote Powerpack/Battery Charger equipped with 12 x LC 123 re-chargeable batteries and integral
mains battery charger

Multi Position Stand enables easier deployment of either the Contact or Contactless Microphones in
many EOD and Counter IED applications. It enables the microphones to be deployed at almost any level
and angle from ground level up to 1.25 metre high.

Multi Socket for use when the Cable Reel is deployed to facillitate the connection of a Microphone/Head-
phone set at a distance from the Signal Processing Unit.

3 metre Sensor Connector Cable used to connect Microphone or Sensor to the Signal Processing Unit or
Multi
Socket.

5 metre Amplifier Connector Cable for use in
conjunction with Cable Reel.

100 metre Cable Reel facilitates deployment of
Microphone or Sensor and Headphone/Microphone
set up to 105 metres from the Signal Processing Unit.
Cable Reel features the latest Super Lightweight
SPECIFICATION Signal Cable.
Signal Processing Unit (Main Amplifier and Power Module), featuring 4 tuning controls - input gain,
frequency, band width, and separate output volume for 2 monitors. Power is provided by 4 x CR123A
Lithium ion batteries. Operators Handbook

Monitoring time using the Contact Microphone or the Microwave Doppler Contactless Microphone is up Ruggedised Peli Transit Case featuring handle/wheels
to 10 hours in either case. For an extra long monitoring period the optional Remote Powerpack can be and hard foam compartments for all equipment
plugged in to the SPU to give an additional 10 hours therefore giving a capability of up to 20 hours of measuring L730 x W500 xH300mm. Overall weight of
monitoring. The Remote Powerpack feaures 12 x LCR 123 re-chargeable batteries and also features an all equipment in transit case 28kgs.
integral mains operated Battery Charger. The SPU is now a super lightweight module featuring state
of the art electronics with enhanced gain and signal filtering. The unit features 2 Spring Clips to enable
easy attachment to the mounting tapes on the Molle system used on most modern combat body armour,
a shoulder strap is also provided as an alternative. SPU weight is 610g.
12v Jumper Lead for use with Vehicle Battery as an alternative Power Source.
Address Web Phone

2 x Headphone/Microphone Set permitting two people to monitor micrphone or sensor and to communi- Armtec Estate, North Lopham www.richmond-dfs.com +44 (0)1379 686800
cate with each other with full duplex communication, without interrupting the monitored signals. Norfolk, IP22 2LR, UK sales@richmond-dfs.com